Cooler Master HAF II 500 E-ATX Full Tower Case
Original price was: ₹30,999.00.₹18,100.00Current price is: ₹18,100.00.
1 in stock
1 in stock
- Free Delivery All over India
- 24/7 Customer Support
- 100% Secure Checkout
- Free Delivery All over India
- 24/7 Customer Support
- 100% Secure Checkout
Cooler Master HAF II 500 E-ATX Full Tower Case
Features:
Oversized Extra-Thick FansÂ
A purpose-built intake–exhaust system: two Mighty40 F220 intake fans (220 × 40 mm) maximize intake airflow at a controlled noise level, while the Mighty40 V180 exhaust fan (180 × 40 mm) helps keep exhaust airflow as balanced as possible with intake airflow, relieving the long-standing exhaust bottleneck in airflow cases and redefining airflow case cooling performance.
Low Airflow Resistance Design
Large front and rear ventilation openings increase airflow throughput, reducing airflow resistance as much as possible, and therefore minimizing chassis-induced interference with fan performance and airflow paths.
Split-Level Cable Management
Zoned cable-routing space is designed around the thickness and quantity of cables routed through each area, optimizing space utilization. This creates the room needed to accommodate an oversized exhaust fan for improved cooling efficiency, while avoiding uncontrolled chassis volume growth.
MasterRail
Sliding rails and accompanying locking modules support multiple fan and radiator sizes. The thoughtful design does ot obstruct the airflow path of cooling components, helping them deliver their full performance potential. Beyond fans and radiators, any device with mounting-hole layouts matching supported fan or radiator standards can also be secured to MasterRail.
Sliding Cable CoverÂ
The integrated Sliding Cable Cover conceals cables within the centralized routing chamber and visually blends with the motherboard, helping the finished system look clean and organized. Its airflow-guiding design also reduces cable-induced airflow disruption without compromising memory cooling.
Dual-Mode GPU HolderÂ
The Dual-Mode GPU Holder gives users the flexibility to clamp a single GPU or support two GPUs. When supporting two GPUs, each graphics card can be up to 3.6 slots (72mm) thick.
Thermally Prioritized Airflow DividerÂ
The Airflow Divider splits airflow from the lower intake fan into two paths. The primary airflow path is directed toward the position of a standalone GPU, the most common graphics card configuration. The secondary airflow path is guided toward the drive cage area, while still allowing air to be drawn through the ventilation openings above the PSU shroud by devices installed in the PCIe slot area.
Flexible Storage ConfigurationÂ
A convertible drive cage supports both 3.5-inch and 2.5-inch drives and can be installed in different orientations depending on PSU length, providing flexible storage configurations while making efficient use of the lower chamber space.
Scientific Computing Platform CompatibilityÂ
Supports up to four dual-slot GPUs with blower-style coolers, or two open-air GPUs up to 3.6 slots (72mm) thick, with PSU clearance up to 210 mm—making it capable of supporting AI, rendering, simulation, and other GPU compute-intensive platforms.
Detailed Specifications:
Dimensions (L x W x H)
– Incl. Protrusions: 557mm x 262mm x 548mm
– Volume (Incl. Protrusions):Â 79.98 L
Motherboard Support:Â Mini-ITX, Mini-DTX, Micro-ATX, ATX, CEB (ATX – Compatible Standoff Pattern), E-ATX (ATX – Compatible Standoff Pattern; Up to 310 mm Wide)
Material
– Chassis: SGCC (0.7 – 0.8 mm Thickness)
– Panel:Â ABS
– Side Panel:Â Tempered Glass (Left Panel); SGCC (Right Panel)
Clearance
– Cable Routing: 15 – 40 mm
– CPU Cooler: 221mm (Intel); 220mm (AMD)
– Power Supply:Â 150 mm (North-South Drive Orientation);Â 210 mm (East-West Drive Orientation)
Graphics Card Clearance
– Length:Â 430 mm (With Mighty40 F220 Fans Installed)
– Thickness: 72 mm / Card When Installing 2 Graphics Cards; 40 mm / Card When Installing 4 Graphics Cards
Dust Filters:Â Top / Front / Bottom (PSU/SMPS)
Drive Bay Support
3.5″ HDD: 3 (PSU Length ≤ 150 mm) / 2 (PSU Length > 150mm but ≤ 210 mm)
2.5″ SSD: 6 (PSU Length ≤ 150 mm) / 4 (PSU Length > 150mm but ≤ 210 mm)
Preinstalled Drive Bay:
3.5″ HDD: 3
2.5″ SSD: 6
Fans Support
Top: 3 x 120mm / 140mm, ORÂ 2 x 160mm / 180mm
Front:Â Default: 2 x 220mm;Â With MasterRails: 3 x 120mm / 140mm, or 2 x 160mm / 180mm
Rear:Â 1 x 180mm
Pre-installed Fans
Front:Â 2 x Mighty40 F220
Rear:Â 1 x Mighty40 V180
Fan Hub
Ports:6 x PWM; 6 x ARGB
Total Power Capacity:Â 54W
Radiator Support
Top:Â 240 / 280 / 360-120 / 360-180 mm (Conditional Support*)
Front: With MasterRails: 240 / 280 / 360-120 / 360-180 mm (Conditional Support**)
Rear: 180mm
*Maximum combined fan and radiator thickness: 58 mm;Â ** Maximum combined fan and radiator thickness: 72 mm. Thermally Prioritized Airflow divider must be removed
Specification:
| Cabinet | |
| Cabinet Size | FULL-TOWER |
| Color | Black |
| Material |
|
| Expansion Slots | 8 |
| Motherboard Size | E-ATX,CEB,ATX,M-ATX,M-DTX,M-ITX |
| Max CPU Cooler Height | 220mm |
| Max PSU Length | 210mm |
| Max GPU Length | 430mm |
| Max 3.5″ HDD | 3 |
| Max 2.5″ SSD | 6 |
| Dust Filters | Top, Front, Bottom |
| Pre-installed Fans | 3 |
| Max Fan Support | 6 |
| Radiator Support | 360mm,280mm,240mm,180mm,140mm,120mm |
| I/O Panel | 1 x USB 3.2 Gen 2×2 Type-C, 2 x USB 3.2 Gen 1 Type-A, Audio + Mic, Reset Button |
| Warranty |
|
| Note*** | ***Features, pricing, and specifications are subject to change without notice, and items may sometimes be out of stock. |
| Weight | 9 kg |
|---|---|
| Dimensions | 65 × 65 × 40 cm |
| Brand |
Cooler Master |
| Color type |
BLACK |
| Cabinet size |
E-ATX |
| Motherboard size |
ATX ,E-ATX ,M-ATX ,M-ITX |
| Max fan support |
6 |
| Warranty |
CASE : 2 YEAR ,FAN : 5 YEAR |
1. We have a hassle-free cancellation request option available. You have to mail or call us to cancel your order.
2. In case the order gets canceled by us, then the complete order amount will be refunded.
3. Order modification and cancellation are not available once the product has been shipped.
4. In case of complaints regarding products that come with a warranty from manufacturers, please refer the issue to them. VIPER PC believes in helping its customers as far as possible and therefore has a liberal cancellation policy. Under this policy
1. We accept return and refund requests only if the product delivered by us is in damaged condition, the wrong product was sent, the product is dead, or the product is defective (Note: Customer has to record the video before opening the product(courier) for the refund). Buyers will have 3 days to 7 days (7 days is applicable on purchase of a complete PC set) after delivery to inform us in case of any dispute in the order to claim a return or a refund. Buyer needs to bring the issue to our attention either by emailing us (preferred) or by calling us.
2. If the seal of the product is opened and the product is not faulty, then a return/refund will not be applicable.
3. Return / Refund request will be canceled if any part or accessory is missing from the product box.
4. Packaging material should be kept by the buyer until the return window is opened, as this will help them to pack the product in its original form to avoid any damage during transit.
5. The product should be packed in a proper way as it was received by the buyer. Do not apply tapes or glues directly on the product or on the product box, this may lead to the cancellation of your return request.
6. All the accessories that were delivered along with the product should be returned in the same way and along with the product. We will initiate the refund once we receive the courier or product, as it was sent by us. If there are any missing parts in the product, then it may lead to the cancellation of the refund.
7. Refunds usually take 03 – 05 working days to reflect in your account.
Cooler Master HAF II 500 E-ATX Full Tower Case
Features:
Oversized Extra-Thick FansÂ
A purpose-built intake–exhaust system: two Mighty40 F220 intake fans (220 × 40 mm) maximize intake airflow at a controlled noise level, while the Mighty40 V180 exhaust fan (180 × 40 mm) helps keep exhaust airflow as balanced as possible with intake airflow, relieving the long-standing exhaust bottleneck in airflow cases and redefining airflow case cooling performance.
Low Airflow Resistance Design
Large front and rear ventilation openings increase airflow throughput, reducing airflow resistance as much as possible, and therefore minimizing chassis-induced interference with fan performance and airflow paths.
Split-Level Cable Management
Zoned cable-routing space is designed around the thickness and quantity of cables routed through each area, optimizing space utilization. This creates the room needed to accommodate an oversized exhaust fan for improved cooling efficiency, while avoiding uncontrolled chassis volume growth.
MasterRail
Sliding rails and accompanying locking modules support multiple fan and radiator sizes. The thoughtful design does ot obstruct the airflow path of cooling components, helping them deliver their full performance potential. Beyond fans and radiators, any device with mounting-hole layouts matching supported fan or radiator standards can also be secured to MasterRail.
Sliding Cable CoverÂ
The integrated Sliding Cable Cover conceals cables within the centralized routing chamber and visually blends with the motherboard, helping the finished system look clean and organized. Its airflow-guiding design also reduces cable-induced airflow disruption without compromising memory cooling.
Dual-Mode GPU HolderÂ
The Dual-Mode GPU Holder gives users the flexibility to clamp a single GPU or support two GPUs. When supporting two GPUs, each graphics card can be up to 3.6 slots (72mm) thick.
Thermally Prioritized Airflow DividerÂ
The Airflow Divider splits airflow from the lower intake fan into two paths. The primary airflow path is directed toward the position of a standalone GPU, the most common graphics card configuration. The secondary airflow path is guided toward the drive cage area, while still allowing air to be drawn through the ventilation openings above the PSU shroud by devices installed in the PCIe slot area.
Flexible Storage ConfigurationÂ
A convertible drive cage supports both 3.5-inch and 2.5-inch drives and can be installed in different orientations depending on PSU length, providing flexible storage configurations while making efficient use of the lower chamber space.
Scientific Computing Platform CompatibilityÂ
Supports up to four dual-slot GPUs with blower-style coolers, or two open-air GPUs up to 3.6 slots (72mm) thick, with PSU clearance up to 210 mm—making it capable of supporting AI, rendering, simulation, and other GPU compute-intensive platforms.
Detailed Specifications:
Dimensions (L x W x H)
– Incl. Protrusions: 557mm x 262mm x 548mm
– Volume (Incl. Protrusions):Â 79.98 L
Motherboard Support:Â Mini-ITX, Mini-DTX, Micro-ATX, ATX, CEB (ATX – Compatible Standoff Pattern), E-ATX (ATX – Compatible Standoff Pattern; Up to 310 mm Wide)
Material
– Chassis: SGCC (0.7 – 0.8 mm Thickness)
– Panel:Â ABS
– Side Panel:Â Tempered Glass (Left Panel); SGCC (Right Panel)
Clearance
– Cable Routing: 15 – 40 mm
– CPU Cooler: 221mm (Intel); 220mm (AMD)
– Power Supply:Â 150 mm (North-South Drive Orientation);Â 210 mm (East-West Drive Orientation)
Graphics Card Clearance
– Length:Â 430 mm (With Mighty40 F220 Fans Installed)
– Thickness: 72 mm / Card When Installing 2 Graphics Cards; 40 mm / Card When Installing 4 Graphics Cards
Dust Filters:Â Top / Front / Bottom (PSU/SMPS)
Drive Bay Support
3.5″ HDD: 3 (PSU Length ≤ 150 mm) / 2 (PSU Length > 150mm but ≤ 210 mm)
2.5″ SSD: 6 (PSU Length ≤ 150 mm) / 4 (PSU Length > 150mm but ≤ 210 mm)
Preinstalled Drive Bay:
3.5″ HDD: 3
2.5″ SSD: 6
Fans Support
Top: 3 x 120mm / 140mm, ORÂ 2 x 160mm / 180mm
Front:Â Default: 2 x 220mm;Â With MasterRails: 3 x 120mm / 140mm, or 2 x 160mm / 180mm
Rear:Â 1 x 180mm
Pre-installed Fans
Front:Â 2 x Mighty40 F220
Rear:Â 1 x Mighty40 V180
Fan Hub
Ports:6 x PWM; 6 x ARGB
Total Power Capacity:Â 54W
Radiator Support
Top:Â 240 / 280 / 360-120 / 360-180 mm (Conditional Support*)
Front: With MasterRails: 240 / 280 / 360-120 / 360-180 mm (Conditional Support**)
Rear: 180mm
*Maximum combined fan and radiator thickness: 58 mm;Â ** Maximum combined fan and radiator thickness: 72 mm. Thermally Prioritized Airflow divider must be removed
Specification:
| Cabinet | |
| Cabinet Size | FULL-TOWER |
| Color | Black |
| Material |
|
| Expansion Slots | 8 |
| Motherboard Size | E-ATX,CEB,ATX,M-ATX,M-DTX,M-ITX |
| Max CPU Cooler Height | 220mm |
| Max PSU Length | 210mm |
| Max GPU Length | 430mm |
| Max 3.5″ HDD | 3 |
| Max 2.5″ SSD | 6 |
| Dust Filters | Top, Front, Bottom |
| Pre-installed Fans | 3 |
| Max Fan Support | 6 |
| Radiator Support | 360mm,280mm,240mm,180mm,140mm,120mm |
| I/O Panel | 1 x USB 3.2 Gen 2×2 Type-C, 2 x USB 3.2 Gen 1 Type-A, Audio + Mic, Reset Button |
| Warranty |
|
| Note*** | ***Features, pricing, and specifications are subject to change without notice, and items may sometimes be out of stock. |
| Weight | 9 kg |
|---|---|
| Dimensions | 65 × 65 × 40 cm |
| Brand |
Cooler Master |
| Color type |
BLACK |
| Cabinet size |
E-ATX |
| Motherboard size |
ATX ,E-ATX ,M-ATX ,M-ITX |
| Max fan support |
6 |
| Warranty |
CASE : 2 YEAR ,FAN : 5 YEAR |
1. We have a hassle-free cancellation request option available. You have to mail or call us to cancel your order.
2. In case the order gets canceled by us, then the complete order amount will be refunded.
3. Order modification and cancellation are not available once the product has been shipped.
4. In case of complaints regarding products that come with a warranty from manufacturers, please refer the issue to them. VIPER PC believes in helping its customers as far as possible and therefore has a liberal cancellation policy. Under this policy
1. We accept return and refund requests only if the product delivered by us is in damaged condition, the wrong product was sent, the product is dead, or the product is defective (Note: Customer has to record the video before opening the product(courier) for the refund). Buyers will have 3 days to 7 days (7 days is applicable on purchase of a complete PC set) after delivery to inform us in case of any dispute in the order to claim a return or a refund. Buyer needs to bring the issue to our attention either by emailing us (preferred) or by calling us.
2. If the seal of the product is opened and the product is not faulty, then a return/refund will not be applicable.
3. Return / Refund request will be canceled if any part or accessory is missing from the product box.
4. Packaging material should be kept by the buyer until the return window is opened, as this will help them to pack the product in its original form to avoid any damage during transit.
5. The product should be packed in a proper way as it was received by the buyer. Do not apply tapes or glues directly on the product or on the product box, this may lead to the cancellation of your return request.
6. All the accessories that were delivered along with the product should be returned in the same way and along with the product. We will initiate the refund once we receive the courier or product, as it was sent by us. If there are any missing parts in the product, then it may lead to the cancellation of the refund.
7. Refunds usually take 03 – 05 working days to reflect in your account.
Related Products
In stock
In stock
In stock
In stock
In stock
In stock
